Why do these leaks stay hidden for so long?
Because the water goes into the floor assembly instead of across the floor. Subfloor, underlayment and cabinet bases absorb it, a floating floor covers it, and the appliance stands over the evidence. Nothing appears in the room until the materials are saturated enough to change shape.
The materials involved are also quiet about it. Particle-board cabinet bases and engineered floor cores swell gradually rather than dramatically, so a floor that is slowly cupping reads as wear rather than water. A kitchen can look entirely normal while the subfloor under one cabinet run is wet from end to end.
This is the argument for taking a look occasionally rather than waiting for a sign. Pulling out the kick panel under a dishwasher takes two minutes, and looking behind a washing machine takes slightly longer. Both are the cheapest inspection in the house.
Can a wet subfloor under a floating floor be dried?
Sometimes, if it is caught early, by lifting part of the covering and moving air into the cavity. The floating floor itself usually cannot be dried in place, because it is designed to shed water off its surface and to sit over a layer that traps anything underneath.
The decision depends on the core material and how long it has been wet. A plank with a swollen core and separated seams will not come back, and reinstalling it over a dried subfloor is not possible. A covering that was wet briefly, lifted promptly and kept flat sometimes can be relaid, and the readings on the subfloor decide when.
Where the subfloor itself is a particle-board product rather than plywood, saturation can mean the sheet is finished regardless of drying. That is a measurement and a physical inspection rather than a judgment call, and it is better made with the covering lifted than through it.
- Lift a section of covering rather than drilling through a finished floor
- Read the subfloor against dry subfloor elsewhere in the same room
- Check the cabinet bases and the wall base, not only the open floor
- Keep lifted covering flat and dry in case any of it can be reused
What does a leak on an upper floor do?
It wets two levels. Water from a second-floor laundry or kitchen runs across the subfloor, finds a penetration or a seam, and arrives in the ceiling below, soaking insulation and ceiling board on its way. The ceiling is often where it is noticed first.
A ceiling below an appliance is read and usually opened, because insulation above a ceiling holds water and does not give it up quickly. The page on ceiling and drywall water damage covers how those assemblies are judged, and the decision about opening is made from the readings rather than from how the ceiling looks.
Upper-floor laundries are worth a second thought generally. A pan under the machine with a drain line that actually goes somewhere, and a leak alarm on the floor, cost little and change the outcome of the most common failure. Neither prevents a hose bursting; both mean somebody knows within minutes.
Is appliance water clean?
Supply water is clean at the connection. Drain water from a washer or a dishwasher is not, and it is handled as unsanitary, which means porous material it soaked comes out rather than being dried. Clean water that has sat in a floor assembly for days is no longer treated as clean either.
That distinction changes the removal list more than anything else about the job. A burst supply hose found within hours may lose only a section of floor covering, while a drain overflow that has happened repeatedly for months will usually cost the cabinet base, the underlayment and sometimes a section of subfloor.
Where growth has already started, which is common in these late-found leaks, containment and removal come before drying. That work is described on the page for mold after water damage. Indiana has no state mold license, so it is fair to ask any crew what standard it works to.